Skip to main content

Python Data Loading from aws s3 to aws s3 using dlt Library

Connecting other file sources

This document describes how to set up loading from aws 3, but our filesystem source can not only stream from s3, but also from Google Cloud Storage, Google Drive, Azure, or local filesystem. Learn more about this here.

Connecting other file destinations

This document describes how to set up loading to aws 3, but our filesystem source can not only load to s3, but also to Google Cloud Storage, Google Drive, Azure, or local filesystem. Learn more about this here.

Need help deploying these pipelines, or figuring out how to run them in your data stack?

Join our Slack community or book a call with our support engineer Adrian.

Welcome to our technical documentation on how to utilize the dlt open-source Python library for data loading. This guide will walk you through the process of streaming CSV, Parquet, and JSONL files from AWS S3, Google Cloud Storage, Google Drive, Azure, or your local filesystem using the reader source. Our focus will be on the AWS S3 filesystem destination, a tool that stores data in remote file systems and bucket storages. It primarily functions as a staging area for other destinations, but can also be used to swiftly construct a data lake. Dive in to learn more about how dlt and AWS S3 can streamline your data operations. Further information is available at this link.

dlt Key Features​

  • Filesystem & Buckets: The dlt library supports storing data in remote file systems and bucket storages like S3, Google Storage, and Azure Blob Storage. It uses fsspec to abstract file operations and is primarily used as a staging area for other destinations. More details can be found here.

  • Governance Support: dlt pipelines offer robust governance support through three key mechanisms: pipeline metadata utilization, schema enforcement and curation, and schema change alerts. This contributes to better data management practices, compliance adherence, and overall data governance. Read more about these features here.

  • Setup Guide: The dlt project can be easily initialized with the dlt init command. This command initializes your pipeline with a specified source and destination. More information about initializing a dlt project can be found here.

  • Data Loading: All files are stored in a single folder with the name of the dataset that you passed to the run or load methods of the pipeline. The name of each file contains essential metadata on the content. More details about data loading can be found here.

  • Memory/Disk Management: dlt buffers data in memory to speed up processing and uses the file system to pass data between the extract and normalize stages. Users can control the size of the buffers and size and number of the files to fine-tune memory and CPU usage. More details about memory/disk management can be found here.

Getting started with your pipeline locally​

0. Prerequisites​

dlt requires Python 3.8 or higher. Additionally, you need to have the pip package manager installed, and we recommend using a virtual environment to manage your dependencies. You can learn more about preparing your computer for dlt in our installation reference.

1. Install dlt​

First you need to install the dlt library with the correct extras for AWS S3:

pip install "dlt[filesystem]"

The dlt cli has a useful command to get you started with any combination of source and destination. For this example, we want to load data from AWS S3 to AWS S3. You can run the following commands to create a starting point for loading data from AWS S3 to AWS S3:

# create a new directory
mkdir my-filesystem-pipeline
cd my-filesystem-pipeline
# initialize a new pipeline with your source and destination
dlt init filesystem filesystem
# install the required dependencies
pip install -r requirements.txt

The last command will install the required dependencies for your pipeline. The dependencies are listed in the requirements.txt:

dlt[filesystem]>=0.4.3a0
openpyxl>=3.0.0

You now have the following folder structure in your project:

my-filesystem-pipeline/
├── .dlt/
│   ├── config.toml          # configs for your pipeline
│   └── secrets.toml         # secrets for your pipeline
├── filesystem/                   # folder with source specific files
│   └── ...
├── filesystem_pipeline.py        # your main pipeline script
├── requirements.txt         # dependencies for your pipeline
└── .gitignore               # ignore files for git (not required)

2. Configuring your source and destination credentials​

The dlt cli will have created a .dlt directory in your project folder. This directory contains a config.toml file and a secrets.toml file that you can use to configure your pipeline:

config.toml​

# put your configuration values here

[runtime]
log_level="WARNING"  # the system log level of dlt
# use the dlthub_telemetry setting to enable/disable anonymous usage data reporting, see https://dlthub.com/docs/telemetry
dlthub_telemetry = true

[sources.filesystem]
bucket_url = "bucket_url" # please set me up!

secrets.toml​

# put your secret values and credentials here. do not share this file and do not push it to github

[sources.filesystem.credentials]
aws_access_key_id = "aws_access_key_id" # please set me up!
aws_secret_access_key = "aws_secret_access_key" # please set me up!

[destination.filesystem]
bucket_url = "bucket_url" # please set me up!

[destination.filesystem.credentials]
aws_access_key_id = "aws_access_key_id" # please set me up!
aws_secret_access_key = "aws_secret_access_key" # please set me up!
Further help setting up your source and destinations

Please consult the detailed setup instructions for the AWS S3 destination in the dlt destinations documentation.

Likewise you can find the setup instructions for AWS S3 source in the dlt verifed sources documentation.

3. Running your pipeline for the first time​

The dlt cli has also created a main pipeline script for you at filesystem_pipeline.py, as well as a folder filesystem that contains additional python files for your source. These files are your local copies which you can modify to fit your needs. In some cases you may find that you only need to do small changes to your pipelines or add some configurations, in other cases these files can serve as a working starting point for your code, but will need to be adjusted to do what you need them to do.

The main pipeline script will look something like this:

import os
import posixpath
from typing import Iterator

import dlt
from dlt.sources import TDataItems

try:
    from .filesystem import FileItemDict, filesystem, readers, read_csv  # type: ignore
except ImportError:
    from filesystem import (
        FileItemDict,
        filesystem,
        readers,
        read_csv,
    )


TESTS_BUCKET_URL = posixpath.abspath("../tests/filesystem/samples/")


def stream_and_merge_csv() -> None:
    """Demonstrates how to scan folder with csv files, load them in chunk and merge on date column with the previous load"""
    pipeline = dlt.pipeline(
        pipeline_name="standard_filesystem_csv",
        destination='filesystem',
        dataset_name="met_data",
    )
    # met_data contains 3 columns, where "date" column contain a date on which we want to merge
    # load all csvs in A801
    met_files = readers(
        bucket_url=TESTS_BUCKET_URL, file_glob="met_csv/A801/*.csv"
    ).read_csv()
    # tell dlt to merge on date
    met_files.apply_hints(write_disposition="merge", merge_key="date")
    # NOTE: we load to met_csv table
    load_info = pipeline.run(met_files.with_name("met_csv"))
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)

    # now let's simulate loading on next day. not only current data appears but also updated record for the previous day are present
    # all the records for previous day will be replaced with new records
    met_files = readers(
        bucket_url=TESTS_BUCKET_URL, file_glob="met_csv/A801/*.csv"
    ).read_csv()
    met_files.apply_hints(write_disposition="merge", merge_key="date")
    load_info = pipeline.run(met_files.with_name("met_csv"))

    # you can also do dlt pipeline standard_filesystem_csv show to confirm that all A801 were replaced with A803 records for overlapping day
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)


def read_csv_with_duckdb() -> None:
    pipeline = dlt.pipeline(
        pipeline_name="standard_filesystem",
        destination='filesystem',
        dataset_name="met_data_duckdb",
    )

    # load all the CSV data, excluding headers
    met_files = readers(
        bucket_url=TESTS_BUCKET_URL, file_glob="met_csv/A801/*.csv"
    ).read_csv_duckdb(chunk_size=1000, header=True)

    load_info = pipeline.run(met_files)

    print(load_info)
    print(pipeline.last_trace.last_normalize_info)


def read_csv_duckdb_compressed() -> None:
    pipeline = dlt.pipeline(
        pipeline_name="standard_filesystem",
        destination='filesystem',
        dataset_name="taxi_data",
        full_refresh=True,
    )

    met_files = readers(
        bucket_url=TESTS_BUCKET_URL,
        file_glob="gzip/*",
    ).read_csv_duckdb()

    load_info = pipeline.run(met_files)
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)


def read_parquet_and_jsonl_chunked() -> None:
    pipeline = dlt.pipeline(
        pipeline_name="standard_filesystem",
        destination='filesystem',
        dataset_name="teams_data",
    )
    # When using the readers resource, you can specify a filter to select only the files you
    # want to load including a glob pattern. If you use a recursive glob pattern, the filenames
    # will include the path to the file inside the bucket_url.

    # JSONL reading (in large chunks!)
    jsonl_reader = readers(TESTS_BUCKET_URL, file_glob="**/*.jsonl").read_jsonl(
        chunksize=10000
    )
    # PARQUET reading
    parquet_reader = readers(TESTS_BUCKET_URL, file_glob="**/*.parquet").read_parquet()
    # load both folders together to specified tables
    load_info = pipeline.run(
        [
            jsonl_reader.with_name("jsonl_team_data"),
            parquet_reader.with_name("parquet_team_data"),
        ]
    )
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)


def read_custom_file_type_excel() -> None:
    """Here we create an extract pipeline using filesystem resource and read_csv transformer"""

    # instantiate filesystem directly to get list of files (FileItems) and then use read_excel transformer to get
    # content of excel via pandas

    @dlt.transformer(standalone=True)
    def read_excel(
        items: Iterator[FileItemDict], sheet_name: str
    ) -> Iterator[TDataItems]:
        import pandas as pd

        for file_obj in items:
            with file_obj.open() as file:
                yield pd.read_excel(file, sheet_name).to_dict(orient="records")

    freshman_xls = filesystem(
        bucket_url=TESTS_BUCKET_URL, file_glob="../custom/freshman_kgs.xlsx"
    ) | read_excel("freshman_table")

    load_info = dlt.run(
        freshman_xls.with_name("freshman"),
        destination='filesystem',
        dataset_name="freshman_data",
    )
    print(load_info)


def copy_files_resource(local_folder: str) -> None:
    """Demonstrates how to copy files locally by adding a step to filesystem resource and the to load the download listing to db"""
    pipeline = dlt.pipeline(
        pipeline_name="standard_filesystem_copy",
        destination='filesystem',
        dataset_name="standard_filesystem_data",
    )

    # a step that copies files into test storage
    def _copy(item: FileItemDict) -> FileItemDict:
        # instantiate fsspec and copy file
        dest_file = os.path.join(local_folder, item["file_name"])
        # create dest folder
        os.makedirs(os.path.dirname(dest_file), exist_ok=True)
        # download file
        item.fsspec.download(item["file_url"], dest_file)
        # return file item unchanged
        return item

    # use recursive glob pattern and add file copy step
    downloader = filesystem(TESTS_BUCKET_URL, file_glob="**").add_map(_copy)

    # NOTE: you do not need to load any data to execute extract, below we obtain
    # a list of files in a bucket and also copy them locally
    # listing = list(downloader)
    # print(listing)

    # download to table "listing"
    # downloader = filesystem(TESTS_BUCKET_URL, file_glob="**").add_map(_copy)
    load_info = pipeline.run(
        downloader.with_name("listing"), write_disposition="replace"
    )
    # pretty print the information on data that was loaded
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)


def read_files_incrementally_mtime() -> None:
    pipeline = dlt.pipeline(
        pipeline_name="standard_filesystem_incremental",
        destination='filesystem',
        dataset_name="file_tracker",
    )

    # here we modify filesystem resource so it will track only new csv files
    # such resource may be then combined with transformer doing further processing
    new_files = filesystem(bucket_url=TESTS_BUCKET_URL, file_glob="csv/*")
    # add incremental on modification time
    new_files.apply_hints(incremental=dlt.sources.incremental("modification_date"))
    load_info = pipeline.run((new_files | read_csv()).with_name("csv_files"))
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)

    # load again - no new files!
    new_files = filesystem(bucket_url=TESTS_BUCKET_URL, file_glob="csv/*")
    # add incremental on modification time
    new_files.apply_hints(incremental=dlt.sources.incremental("modification_date"))
    load_info = pipeline.run((new_files | read_csv()).with_name("csv_files"))
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)


if __name__ == "__main__":
    copy_files_resource("_storage")
    stream_and_merge_csv()
    read_parquet_and_jsonl_chunked()
    read_custom_file_type_excel()
    read_files_incrementally_mtime()
    read_csv_with_duckdb()
    read_csv_duckdb_compressed()

Provided you have set up your credentials, you can run your pipeline like a regular python script with the following command:

python filesystem_pipeline.py

4. Inspecting your load result​

You can now inspect the state of your pipeline with the dlt cli:

dlt pipeline filesystem_pipeline info

You can also use streamlit to inspect the contents of your AWS S3 destination for this:

# install streamlit
pip install streamlit
# run the streamlit app for your pipeline with the dlt cli:
dlt pipeline filesystem_pipeline show

5. Next steps to get your pipeline running in production​

One of the beauties of dlt is, that we are just a plain Python library, so you can run your pipeline in any environment that supports Python >= 3.8. We have a couple of helpers and guides in our docs to get you there:

The Deploy section will show you how to deploy your pipeline to​

  • Deploy with Github Actions: dlt can be easily deployed using Github Actions. You can specify when the GitHub Action should run using a cron schedule expression. Learn more
  • Deploy with Airflow: dlt supports deployment with Airflow. It creates an Airflow DAG for your pipeline script which you can customize. Learn more
  • Deploy with Google Cloud Functions: You can deploy your dlt pipeline with Google Cloud Functions. This allows you to run your pipeline in response to events without needing to manage a server. Learn more
  • Other Deployment Options: dlt provides flexibility with several other deployment options. Explore more

The running in production section will teach you about:​

  • Monitor Your Pipeline: dlt provides robust monitoring capabilities, enabling you to keep a close eye on your pipeline's performance and data quality. Find out more about it here.
  • Set Up Alerts: Stay informed about your pipeline's status with dlt's alerting feature. It helps you to detect and respond to issues promptly. Learn how to set up alerts here.
  • Enable Tracing: dlt allows you to trace your pipeline's execution, providing detailed insights into its operation. This can be particularly useful for debugging and optimization. Discover how to set up tracing here.

Additional pipeline guides​

This demo works on codespaces. Codespaces is a development environment available for free to anyone with a Github account. You'll be asked to fork the demo repository and from there the README guides you with further steps.
The demo uses the Continue VSCode extension.

Off to codespaces!

DHelp

Ask a question

Welcome to "Codex Central", your next-gen help center, driven by OpenAI's GPT-4 model. It's more than just a forum or a FAQ hub – it's a dynamic knowledge base where coders can find AI-assisted solutions to their pressing problems. With GPT-4's powerful comprehension and predictive abilities, Codex Central provides instantaneous issue resolution, insightful debugging, and personalized guidance. Get your code running smoothly with the unparalleled support at Codex Central - coding help reimagined with AI prowess.