Skip to main content

Loading Data from AWS S3 to Azure Synapse with dlt in Python

Need help deploying these pipelines, or figuring out how to run them in your data stack?

Join our Slack community or book a call with our support engineer Violetta.

This document explains how to load data from AWS S3 to Azure Synapse using the open-source Python library dlt. The AWS S3 source efficiently streams CSV, Parquet, and JSONL files with the reader source. Azure Synapse Analytics is a comprehensive service that integrates enterprise data warehousing and Big Data analytics. For more information about the AWS S3 source, visit AWS S3. This guide will help you set up and use dlt to facilitate seamless data transfer between these platforms.

dlt Key Features​

  • Install dlt with Synapse: Easily install the DLT library with Synapse dependencies using pip install dlt[synapse]. Learn more.
  • Governance Support: dlt pipelines offer robust governance support through pipeline metadata, schema enforcement and curation, and schema change alerts. Learn more.
  • Staging Support: Synapse supports Azure Blob Storage as a file staging destination, allowing for efficient data loading using the COPY INTO statement. Learn more.
  • Write Disposition: Understand how dlt handles write dispositions such as append, replace, and merge for Athena destinations. Learn more.
  • AWS S3 Setup Guide: Step-by-step instructions on setting up AWS S3 bucket storage and credentials for dlt pipelines. Learn more.

Getting started with your pipeline locally​

0. Prerequisites​

dlt requires Python 3.8 or higher. Additionally, you need to have the pip package manager installed, and we recommend using a virtual environment to manage your dependencies. You can learn more about preparing your computer for dlt in our installation reference.

1. Install dlt​

First you need to install the dlt library with the correct extras for Azure Synapse:

pip install "dlt[synapse]"

The dlt cli has a useful command to get you started with any combination of source and destination. For this example, we want to load data from AWS S3 to Azure Synapse. You can run the following commands to create a starting point for loading data from AWS S3 to Azure Synapse:

# create a new directory
mkdir filesystem_aws_pipeline
cd filesystem_aws_pipeline
# initialize a new pipeline with your source and destination
dlt init filesystem synapse
# install the required dependencies
pip install -r requirements.txt

The last command will install the required dependencies for your pipeline. The dependencies are listed in the requirements.txt:


dlt[synapse]>=0.4.3a0
openpyxl>=3.0.0

You now have the following folder structure in your project:

filesystem_aws_pipeline/
├── .dlt/
│   ├── config.toml          # configs for your pipeline
│   └── secrets.toml         # secrets for your pipeline
├── filesystem/                   # folder with source specific files
│   └── ...
├── filesystem_pipeline.py        # your main pipeline script
├── requirements.txt         # dependencies for your pipeline
└── .gitignore               # ignore files for git (not required)

2. Configuring your source and destination credentials​

The dlt cli will have created a .dlt directory in your project folder. This directory contains a config.toml file and a secrets.toml file that you can use to configure your pipeline. The automatically created version of these files look like this:

generated config.toml​

# put your configuration values here

[runtime]
log_level="WARNING"  # the system log level of dlt
# use the dlthub_telemetry setting to enable/disable anonymous usage data reporting, see https://dlthub.com/docs/telemetry
dlthub_telemetry = true

[sources.filesystem]
bucket_url = "bucket_url" # please set me up!

generated secrets.toml​

# put your secret values and credentials here. do not share this file and do not push it to github

[sources.filesystem.credentials]
aws_access_key_id = "aws_access_key_id" # please set me up!
aws_secret_access_key = "aws_secret_access_key" # please set me up!

[destination.synapse]
dataset_name = "dataset_name" # please set me up!
create_indexes = false
default_table_index_type = "heap"
staging_use_msi = false

[destination.synapse.credentials]
database = "database" # please set me up!
password = "password" # please set me up!
username = "username" # please set me up!
host = "host" # please set me up!
port = 1433
connect_timeout = 15
driver = "driver" # please set me up!

2.1. Adjust the generated code to your usecase​

Further help setting up your source and destinations
  • Read more about setting up the AWS S3 source in our docs.
  • Read more about setting up the Azure Synapse destination in our docs.

The default filesystem source is already configured to load from AWS S3.

You can set up your bucket_url and file_glob in the config.toml

[sources.filesystem] # use [sources.readers.credentials] for the "readers" source
bucket_url='s3://my_bucket'
file_glob="*"

3. Running your pipeline for the first time​

The dlt cli has also created a main pipeline script for you at filesystem_pipeline.py, as well as a folder filesystem that contains additional python files for your source. These files are your local copies which you can modify to fit your needs. In some cases you may find that you only need to do small changes to your pipelines or add some configurations, in other cases these files can serve as a working starting point for your code, but will need to be adjusted to do what you need them to do.

The main pipeline script will look something like this:


import os
import posixpath
from typing import Iterator

import dlt
from dlt.sources import TDataItems

try:
    from .filesystem import FileItemDict, filesystem, readers, read_csv  # type: ignore
except ImportError:
    from filesystem import (
        FileItemDict,
        filesystem,
        readers,
        read_csv,
    )


TESTS_BUCKET_URL = posixpath.abspath("../tests/filesystem/samples/")


def stream_and_merge_csv() -> None:
    """Demonstrates how to scan folder with csv files, load them in chunk and merge on date column with the previous load"""
    pipeline = dlt.pipeline(
        pipeline_name="standard_filesystem_csv",
        destination='synapse',
        dataset_name="met_data",
    )
    # met_data contains 3 columns, where "date" column contain a date on which we want to merge
    # load all csvs in A801
    met_files = readers(
        bucket_url=TESTS_BUCKET_URL, file_glob="met_csv/A801/*.csv"
    ).read_csv()
    # tell dlt to merge on date
    met_files.apply_hints(write_disposition="merge", merge_key="date")
    # NOTE: we load to met_csv table
    load_info = pipeline.run(met_files.with_name("met_csv"))
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)

    # now let's simulate loading on next day. not only current data appears but also updated record for the previous day are present
    # all the records for previous day will be replaced with new records
    met_files = readers(
        bucket_url=TESTS_BUCKET_URL, file_glob="met_csv/A801/*.csv"
    ).read_csv()
    met_files.apply_hints(write_disposition="merge", merge_key="date")
    load_info = pipeline.run(met_files.with_name("met_csv"))

    # you can also do dlt pipeline standard_filesystem_csv show to confirm that all A801 were replaced with A803 records for overlapping day
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)


def read_csv_with_duckdb() -> None:
    pipeline = dlt.pipeline(
        pipeline_name="standard_filesystem",
        destination='synapse',
        dataset_name="met_data_duckdb",
    )

    # load all the CSV data, excluding headers
    met_files = readers(
        bucket_url=TESTS_BUCKET_URL, file_glob="met_csv/A801/*.csv"
    ).read_csv_duckdb(chunk_size=1000, header=True)

    load_info = pipeline.run(met_files)

    print(load_info)
    print(pipeline.last_trace.last_normalize_info)


def read_csv_duckdb_compressed() -> None:
    pipeline = dlt.pipeline(
        pipeline_name="standard_filesystem",
        destination='synapse',
        dataset_name="taxi_data",
        full_refresh=True,
    )

    met_files = readers(
        bucket_url=TESTS_BUCKET_URL,
        file_glob="gzip/*",
    ).read_csv_duckdb()

    load_info = pipeline.run(met_files)
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)


def read_parquet_and_jsonl_chunked() -> None:
    pipeline = dlt.pipeline(
        pipeline_name="standard_filesystem",
        destination='synapse',
        dataset_name="teams_data",
    )
    # When using the readers resource, you can specify a filter to select only the files you
    # want to load including a glob pattern. If you use a recursive glob pattern, the filenames
    # will include the path to the file inside the bucket_url.

    # JSONL reading (in large chunks!)
    jsonl_reader = readers(TESTS_BUCKET_URL, file_glob="**/*.jsonl").read_jsonl(
        chunksize=10000
    )
    # PARQUET reading
    parquet_reader = readers(TESTS_BUCKET_URL, file_glob="**/*.parquet").read_parquet()
    # load both folders together to specified tables
    load_info = pipeline.run(
        [
            jsonl_reader.with_name("jsonl_team_data"),
            parquet_reader.with_name("parquet_team_data"),
        ]
    )
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)


def read_custom_file_type_excel() -> None:
    """Here we create an extract pipeline using filesystem resource and read_csv transformer"""

    # instantiate filesystem directly to get list of files (FileItems) and then use read_excel transformer to get
    # content of excel via pandas

    @dlt.transformer(standalone=True)
    def read_excel(
        items: Iterator[FileItemDict], sheet_name: str
    ) -> Iterator[TDataItems]:
        import pandas as pd

        for file_obj in items:
            with file_obj.open() as file:
                yield pd.read_excel(file, sheet_name).to_dict(orient="records")

    freshman_xls = filesystem(
        bucket_url=TESTS_BUCKET_URL, file_glob="../custom/freshman_kgs.xlsx"
    ) | read_excel("freshman_table")

    load_info = dlt.run(
        freshman_xls.with_name("freshman"),
        destination='synapse',
        dataset_name="freshman_data",
    )
    print(load_info)


def copy_files_resource(local_folder: str) -> None:
    """Demonstrates how to copy files locally by adding a step to filesystem resource and the to load the download listing to db"""
    pipeline = dlt.pipeline(
        pipeline_name="standard_filesystem_copy",
        destination='synapse',
        dataset_name="standard_filesystem_data",
    )

    # a step that copies files into test storage
    def _copy(item: FileItemDict) -> FileItemDict:
        # instantiate fsspec and copy file
        dest_file = os.path.join(local_folder, item["relative_path"])
        # create dest folder
        os.makedirs(os.path.dirname(dest_file), exist_ok=True)
        # download file
        item.fsspec.download(item["file_url"], dest_file)
        # return file item unchanged
        return item

    # use recursive glob pattern and add file copy step
    downloader = filesystem(TESTS_BUCKET_URL, file_glob="**").add_map(_copy)

    # NOTE: you do not need to load any data to execute extract, below we obtain
    # a list of files in a bucket and also copy them locally
    # listing = list(downloader)
    # print(listing)

    # download to table "listing"
    # downloader = filesystem(TESTS_BUCKET_URL, file_glob="**").add_map(_copy)
    load_info = pipeline.run(
        downloader.with_name("listing"), write_disposition="replace"
    )
    # pretty print the information on data that was loaded
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)


def read_files_incrementally_mtime() -> None:
    pipeline = dlt.pipeline(
        pipeline_name="standard_filesystem_incremental",
        destination='synapse',
        dataset_name="file_tracker",
    )

    # here we modify filesystem resource so it will track only new csv files
    # such resource may be then combined with transformer doing further processing
    new_files = filesystem(bucket_url=TESTS_BUCKET_URL, file_glob="csv/*")
    # add incremental on modification time
    new_files.apply_hints(incremental=dlt.sources.incremental("modification_date"))
    load_info = pipeline.run((new_files | read_csv()).with_name("csv_files"))
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)

    # load again - no new files!
    new_files = filesystem(bucket_url=TESTS_BUCKET_URL, file_glob="csv/*")
    # add incremental on modification time
    new_files.apply_hints(incremental=dlt.sources.incremental("modification_date"))
    load_info = pipeline.run((new_files | read_csv()).with_name("csv_files"))
    print(load_info)
    print(pipeline.last_trace.last_normalize_info)


if __name__ == "__main__":
    copy_files_resource("_storage")
    stream_and_merge_csv()
    read_parquet_and_jsonl_chunked()
    read_custom_file_type_excel()
    read_files_incrementally_mtime()
    read_csv_with_duckdb()
    read_csv_duckdb_compressed()

Provided you have set up your credentials, you can run your pipeline like a regular python script with the following command:

python filesystem_pipeline.py

4. Inspecting your load result​

You can now inspect the state of your pipeline with the dlt cli:

dlt pipeline filesystem_pipeline info

You can also use streamlit to inspect the contents of your Azure Synapse destination for this:

# install streamlit
pip install streamlit
# run the streamlit app for your pipeline with the dlt cli:
dlt pipeline filesystem_pipeline show

5. Next steps to get your pipeline running in production​

One of the beauties of dlt is, that we are just a plain Python library, so you can run your pipeline in any environment that supports Python >= 3.8. We have a couple of helpers and guides in our docs to get you there:

The Deploy section will show you how to deploy your pipeline to​

  • Deploy with Github Actions: Learn how to deploy your dlt pipeline using Github Actions.
  • Deploy with Airflow: Follow this guide to deploy your dlt pipeline with Airflow and Google Composer.
  • Deploy with Google Cloud Functions: Explore how to deploy your dlt pipeline using Google Cloud Functions.
  • More Deployment Options: Check out other methods for deploying your dlt pipeline here.

The running in production section will teach you about:​

  • How to Monitor your pipeline: Learn how to effectively monitor your dlt pipeline in production to ensure smooth operation and quick detection of issues. Read more
  • Set up alerts: Set up alerts to get notified about important events and potential issues in your dlt pipeline, ensuring timely interventions and maintenance. Read more
  • Set up tracing: Implement tracing to keep track of the execution flow and performance metrics of your dlt pipeline, which helps in debugging and optimizing the pipeline. Read more

Additional pipeline guides​

This demo works on codespaces. Codespaces is a development environment available for free to anyone with a Github account. You'll be asked to fork the demo repository and from there the README guides you with further steps.
The demo uses the Continue VSCode extension.

Off to codespaces!

DHelp

Ask a question

Welcome to "Codex Central", your next-gen help center, driven by OpenAI's GPT-4 model. It's more than just a forum or a FAQ hub – it's a dynamic knowledge base where coders can find AI-assisted solutions to their pressing problems. With GPT-4's powerful comprehension and predictive abilities, Codex Central provides instantaneous issue resolution, insightful debugging, and personalized guidance. Get your code running smoothly with the unparalleled support at Codex Central - coding help reimagined with AI prowess.